I have a cisco UBR device in network but when running snmpwalk with device it gives us OID not increasing error. Following is the output of error :-
kumar@mng:~$ snmpwalk -v2c -c ****** pl-ubr-01 iso.3.6.1.2.1.4.34.1.3.4.20.254.128
iso.3.6.1.2.1.4.34.1.3.4.20.254.128.0.0.0.0.0.0.46.248.155.255.254.157.208.25.18.0.27.158 = INTEGER: 49
iso.3.6.1.2.1.4.34.1.3.4.20.254.128.0.0.0.0.0.0.46.248.155.255.254.157.208.25.18.0.27.158 = INTEGER: 49
Error: OID not increasing: iso.3.6.1.2.1.4.34.1.3.4.20.254.128.0.0.0.0.0.0.46.248.155.255.254.157.208.25.18.0.27.158
>= iso.3.6.1.2.1.4.34.1.3.4.20.254.128.0.0.0.0.0.0.46.248.155.255.254.157.208.25.18.0.27.158
kumar@mng:~$
Somebody help in identify cause of issue and how to resolve it.
