CISCO WebEx codec Plus H.323 setting issue

[Harry86840]

Hi~ I purchased CISCO equipment, CISCO WebEX Code Plus (model : TTC7-25) and setting finished. 

But I tried to direct call with IP address but it didn't go thru.

The I realized that I have to setup(or active) H.323 protocol

but in the configuration menu in Web interface, H.323 menu is not there.........while product spec. mentioned 

H.323 protocol supported. 

What should I do for H.323 set-up?

Many Thanks in advance.

[marce1000 · Accepted solution]

 - Check this document , among other topics  you may want to consult , also look for H323 settings :

       https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce94/codec-plus-administrator-guide-ce94.pdf

 M.