Cisco WS-C3560G-48TS bgp limit issue

[asadmbd15]

Hi i am using Cisco WS-C3560G-48TS 

SW Version: 12.2(44)SE6    

System image file is "flash:c3560-advipservicesk9-mz.122-44.SE6.bin"

Router bgp limitation is  <1-65535>  Autonomous system number

but i need to set the bgp 134084 when i try to set 134084 its shows error  "% Unrecognized command" 

If i update the System image file will it fix my problem ?

or how can i use  bgp 134084 at this configuration ?

Thank you advance :) 

[Martin Hruby]

Hello

The IOS version you use doesn't support 4-byte BGP AS numbers as defined in RFC 4893. Try upgrading the IOS on 3560G to version 15.0.2-SE8.

For more information see: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/border-gateway-protocol-bgp/data_sheet_C78-521821.html

Best regards,
Martin