11-05-2010 07:39 AM
PRIMARY RUNNING Config fetch failed for M1978NMS5-11 Cause: Couldnot enter ENABLE Mode from USER Mode
I can putty into the device via SSH and have no problem with my credentials. I went to Common Services > Device and Credentials > Device Management, select this device, and click Edit Credentials. Re-entered the correct enable password multiple times with the same result.
I also tried enabling ArchiveMgmt Service debugging under RME > Admin > System Preferences > Application Loglevel Settings, re-ran the sync archive, then copied some stats from the dcmaservice.log Document attached.
I do not believe that this issue is related to the CSCsu21040 Bug due to the fact I can putty in properly with the correct username/password promts.
Any ideas or suggestions?
Solved! Go to Solution.
11-07-2010 02:18 PM
Try adding "password:" to NMSROOT/objects/cmf/data/TacacsPrompts.ini under the list of password prompts. Then re-run your job. You do not need to restart any daemons.
11-05-2010 08:43 AM
11-07-2010 02:18 PM
Try adding "password:" to NMSROOT/objects/cmf/data/TacacsPrompts.ini under the list of password prompts. Then re-run your job. You do not need to restart any daemons.
11-08-2010 05:46 AM
11-08-2010 06:16 AM
Your the man Joe.
Opened
TacacsPrompts.ini
Added " username: and password: " after the following statements.
USERNAME_PROMPT=username:
PASSWORD_PROMPT=password:
Deploy successful, Fetch successful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide