Hi mates :)
There are 4 core switches in my LAN, I am trying to setup snmp settings of them.
here is the community string command for all 4 switches:
"snmp-server community read RO"
"snmp-server community write RW"
all 4 devices in the LAN were configured with above command.
My question is:
should the community strings be uniq for each device? or can I give the same community string to all four switches as I have done?
Thanks for helping :)
Also keep in mind that if you wish to discover your network with campus, the discovery proccess needs to know and try all community strings on any new device.