Config fetch Failed

[mserranocisco]

Added two nex nodes on LMS 2.6.

Passed Credentials but for Telnet got: Protocol not configured. Through command line it works.

IP's are 192.168.21.62 and 192.168.152.60

Best Regards.

[Sven Hruza]

Is it right, that the IP ..153.253 is your LMS server?

I assume that you deleted the user/pw configured on the device, right?

Is it possible to do a telnet session out of the device center?

[mserranocisco]

Hi,

thanks.

YOu are right, we deleted user/psswd to send the file here, for security reasons.

The ip you mention, is our NNM server, CW LMS is 153.254.

192.168.152.60 is a WS-C3560E-48TD,

192.168.21.62 is a WS-C3750G-48TS, both supported on RME 4.1.1, it's a LMS 3.01, I was wrong when I wrote 2.6, sorry...

[mserranocisco]

sorry, i forgot to update than telnet works from command line.

[Sven Hruza]

Okay, if your LMS is the IP 254 you have to configure that IP on your ACL 1 because you have the "access-class 1 in" on line vty 0 4.