05-04-2011 05:28 PM
Hello!
I have installed the last version of Cisco CP (v2.5) on a Windows 7 64 bits laptop with Internet Explorer 9 and when i execute the software (for the first time or not), i have an error like this : "Access to C:\Program Files (x86)\Cisco Systems\CiscoCP\bin\_uiDefaultLoadComplete was denied."
The software don't work anymore and i get only a blank screen and this error. I've tried rebooting and i have all requirements for the software if i read the documentation (java for example).
Please help me with this problem... It's urgent!
Thank you very much.
Simon
01-25-2018 12:36 PM
Perfect, it resolved my issue getting CCP working.
Thank you.
02-16-2019 12:14 PM
Hi Chaitra,
Your advice was very good and accurate. I follow your steps and I solve it.
My issue was that I have installed the last version of Cisco CP (v2.5) on a Windows 7 64 bits laptop with Internet Explorer 9 and when i execute the software (for the first time or not), i have an error like this : "Access to C:\Program Files (x86)\Cisco Systems\CiscoCP\bin\_uiDefaultLoadComplete was denied."
It was that I had some security issues and hence the permission is being deinied while launching the software.
Now I can use the CCP Application.
Thank you for your very much for that
04-30-2013 04:19 PM
Configuration Professional (CP) with Windows 7 64bits and Internet Explorer (IE) 10
I first turned on compatibility mode for site 127.0.0.1
then Right-click CCP and "run as administrator"
Works perfectly!
06-22-2013 09:30 AM
Hi,
I've this problem with CCP: when it starts it uses only 1/4th of the whole ie10 window, yes I can use the V & H scrollbars but it's boring. I attached a print screen of what I get. I tried all it's suggested in the posts above and in others threads but with no avail.
Thanks for helping. Mike.
07-08-2013 11:24 AM
Hi Guys,
I had the same problem, all did was the following steps,
--->Changing permission for the Cisco system folder
--->Then running it in admin mode
--->For Mike, I have good tip, here it goes,
It all works fine now, thanks a lots guys
09-12-2013 08:26 AM
Hi Joshua. I would like to thank those who brought up this issue and particular thanks to you. I followed as you mentionned and it worked for me. Thanks. Sougui
02-04-2014 10:24 AM
This has been such a pain... Ok so I finally got it running (CCP 2.6) on Win7 64-bit with the following:
- IE11
- Java (both are checked in Java settings):
1.6.0_7 (-Xmx256m)
and 1.6.0_17 (-Xmx256m -Dsun.java2d.d3d=false)
I've unchecked the next-gen Java plugin feature
- Run as Administrator (sucks but it works, I just need to remind myself everytime)
The program opens and it seems EVERYTHING runs EXCEPT the one thing I need to get to, which is the Firewall settings.
In CCP, when I click Security > Firewall > Firewall then select the 'Basic' or 'Advanced' options, then click "Launch the selected task" button, nothing happens.
Am I missing something here? Is there something I need to set first to enable this feature? I'm using a 2911 with the following IOS:
ROM: System Bootstrap, Version 15.0(1r)M15 It was hard to get even this far but this is what I have been trying to get to! Help! Any suggestions??
04-23-2015 02:30 AM
Hello,
I also resolved the problem by launching the CCP as an Administrator.
Regards!
10-28-2018 07:44 PM
Getting this error as well. Resolved the issue by running the CCP as Administrator.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide