Solved: Configuring Catalyst 9120AXI-D

surendarreddy949 · ‎03-13-2023

We have purchased a catalyst C9120AXI-D with serial number FGL2544X0L, we are unable to configure the AP. Could you help in configuring the AP ? Is there any possibility that we can make it without Controller?

Kasun Bandara · ‎03-13-2023

hi,

you can configure this AP in mobility express mode. check below links for guides.

1. about mobility express cisco - https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/88/user_guide/b_ME_User_Guide_88/getg_started.html

2. deploy AP - https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9120ax/quick/guide/ap9120ax-getstart.html#

3. configuration guide - https://www.youtube.com/watch?v=lEtFlc0g9Ig&ab_channel=CiscoWLAN

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

Kasun Bandara · ‎03-13-2023

hi,

you can configure this AP in mobility express mode. check below links for guides.

1. about mobility express cisco - https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/88/user_guide/b_ME_User_Guide_88/getg_started.html

2. deploy AP - https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9120ax/quick/guide/ap9120ax-getstart.html#

3. configuration guide - https://www.youtube.com/watch?v=lEtFlc0g9Ig&ab_channel=CiscoWLAN

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB