ā06-19-2017 12:13 PM
Hi Team,
I have 3650 switch which is causing High cpu. it is running with ver "cat3k_caa-universalk9.SPA.03.06.03.E.152-2.E3.bin" below is the logs
Core 0: CPU utilization for five seconds: 99%; one minute: 82%; five minutes: 79%
Core 1: CPU utilization for five seconds: 19%; one minute: 44%; five minutes: 78%
Core 2: CPU utilization for five seconds: 99%; one minute: 97%; five minutes: 70%
Core 3: CPU utilization for five seconds: 99%; one minute: 92%; five minutes: 87%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5792 3998548 61508064 2547 49.97 49.97 49.98 0 stack-mgr
5790 3561443 17415413 130 26.48 26.47 26.48 1088 fed
8706 2612916 22689851 169 2.68 2.22 1.99 0 iosd
please help me to resolve the issue.
ā06-19-2017 08:27 PM
Before doing anything I would upgrade to a gold star release to resolve as many already known about bugs. I would go to 3.6.6E .
ā06-11-2018 09:17 AM
i've followed your instructions and this issue was finally resolved!!
thanks!
@Philip D'Ath wrote:
Before doing anything I would upgrade to a gold star release to resolve as many already known about bugs. I would go to 3.6.6E .
ā04-03-2018 07:11 AM
The Catalyst 4500 series switches, which includes the Catalyst 4948 switches, has a sophisticated packet-handling methodology for CPU-bound traffic. A commonly perceived problem is high CPU utilization on these switches. This document provides details about the CPU packet-handling architecture and shows you how to identify the causes of high CPU utilization on these switches. The document also lists some common network or configuration scenarios that cause high CPU utilization on the Catalyst 4500 series
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/65591-cat4500-high-cpu.html.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide