CSM 3.0.1 and FWSM 6500 switch module incompatibility

[Leonardo Roberto]

Hi to all!

I inserted stand alone FWSM 3.1.(4) module into CSM 3.0.1.

During discover policy, it gives me the error about version unsupported.

I know, that I can leave this error, using CSM 3.1.

the error...

----------------------------------------

Description

There is a major change on device FWSM-ROMA.

The target type changed.

The version on device is: 3.1(4), platform: Cisco Catalyst 6500 Series Firewall Services Module, mode: ROUTER, multiplicity: SINGLE, target type: TARGET.UNDEFINED.

The version in CSM database is: 2.3(1), platform: Cisco Catalyst 6500 Series Firewall Services Module, mode: ROUTER, multiplicity: SINGLE, target type: TARGET.FWSM.L3.

Operation stop

Action

Please verify running device version with the version in Cisco Security Manager database

Recreate device in Cisco Security Manager Database if needed

------------------------------------------

The CSM3.01 Supported devices document says about that:

Supported Software

.........

Cisco Catalyst 6500 Series Firewall Services Module?Firewall Services Module Software

Release 2.2, 2.3, and 3.1.

.......

The error description says that:

....The version in CSM database is: 2.3(1),...

So, if I can manage 3.1, why the error description says that in the database is stored the 2.3.(1)?

Thanks.

Leonardo

[a-vazquez]

Catalyst 6500 Content Switching Module (WS-X6066-SLB-APC) Requires a Minimum Version of 3.1.4 Content Switching Module (CSM) Software in Order to be Recognized by a Sup720.

Please click following URL:

http://www.cisco.com/en/US/products/ps6498/products_user_guide_chapter09186a00806c2751.html#wp1058146

[Leonardo Roberto]

Hi vazquez,

you mean that:

------------------

Security Manager 3.0.1 supports discovery of firewall policies only.

--------------------

So, I cannot deploy rules into theese modules with CSM 3.0.1?

Thanks

Leonardo

[yjdabear]

This was answered in two older threads:

http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=BDEE3907D4C011BDD78F3E15398493F8.SJ1A?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dde739e

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dde992f

[Leonardo Roberto]

yes I know this answer,

I loaded FWSM 3.1.4 into CSM.

I see it.

But i don't understand how I can discovery policy and how I can deploy policy into FWSM.

Seems that CSM3.01 doesn't mapping the FWSM 3.1.4 SW configuration files.

Documents explain that I can manage 3.1 FWSM IOS SW with CSM3.0.1.

Tks

Leonardo