I'm trying to install Cisco Prime Data Center Network Manager(DCNM) 6.3(2) on a Windows Server 2008 R2 64 SP1 bit box. Im getting to the section where it states that the "DCNM will attempt to auto-resolve ports." It tries to auto resolve the ports and comes back with this error: "DCNM installer failed to auto-resolve ports after 10 attempts. Please free up ports to proceed with installation." This server has the firewall turned off, so all port should be able to communicate.
Has anyone run into this problem, if so can you provide what you did to resolve this?
Thanks
-Aaron
