04-13-2011 11:16 PM
We have install Ciscoworks LMS 3.2 on windows server 2003 enterprise edition.
DFM version is 3.2.0.
While rediscovering devices most of the switches are in Questioned SNMP timeout. If I run device credential verification job for SNMP from RME>Devices>Device Management job executs successfully.
We are using SNMP V3.
Need assistance for the same.
04-15-2011 03:49 PM
Hi,
Be aware that DFM do not support all the privacy algorithms for SNMP V3.
DFM supports the following:
For authentication: Sha, MD5
For privacy DES and AES128
The following privacy algorithms are not supported:
3DES, AES192, and AES256
You can double check this on the User Guide:
Hope this helps.
Andres
04-15-2011 10:29 PM
Hi,
We are using SNMP V3 with MD5 authentication authnopriv.
Previously these Switches was in DFM known devices.
04-18-2011 07:09 AM
Hi Yusuf,
Let's try to delete and re add those devices in DFM.
Also if the devices stay on learning for a long time, please let me know on what learning percentage they stay.
Andres
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide