cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2486
Views
0
Helpful
1
Replies

DHCP doesn't work in Packet Tracer

mike_daetwyler
Level 1
Level 1

The Problem

Hello

I'm having some trouble with my DHCP Server. It doesn't work at all and the clients are only taking IP-Addresses from 'APIPA'.

I'm using different DHCP Pools, which should be used for the different VLANs I configured.

What I've tried so far

The solution approach I tried was something with DHCP Relay & helper-address, but in my case there's only 1 Router, so that can't be it...

Further questions

I wasn't quite sure how to configure de default Router on each DHCP Pool. Do I need an Default Router for every Subnet or is it in this case always the IP of the Router itself? (172.16.15.1, as I configured)

 

Initial situation

This is my IPAM:

IPAM.png

You can download my Pack Tracer File here.

 

1 Accepted Solution

Accepted Solutions

mike_daetwyler
Level 1
Level 1
1 Reply 1

mike_daetwyler
Level 1
Level 1

solved