Does Campus manager 5.0.0 in LMS 3.0 supports ASA5520?

[divash]

Hi,i have installed LMS 3.0 in the network at the DMZ-2 zone of Firewall,its not giving the topology view of ASA 5520 although iam able to ping and telnet ASA ,with this it is showing the devices without any connection giving a CHKDSK UTILITY ERROR.Pls Help to Discover the ASA or any atch is required????

pls help.

[srego4]

go to Common services > device update > and look for the asa5520 ... I believe they do have it. as I had to do the same for the asa 5505 and 5510.... There shd. be a package for asa 55xx....

you also need to have the latest mdf file (its all in the readme when you get teh device package).

[Joe Clarke]

No, Campus does not support the PIX, ASA, or FWSM devices since they do not support CDP, and thus could not appear as connected on the map.

[srego4]

Yes he is right. I did not read your question properly.

ASA 5520 is supported (not all features tho) by RME but not campus

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.0.1/device_support/table/lms301sdt.html

[divash]

Is there any patch for Campus manager to get the topology view of ASA 5520 problem?

[divash]

Thank you very much for your answer,Is there any other way for Campus manager to get the topology view of ASA 5520 problem?

[Joe Clarke]

No. What you are seeing is the best that Campus Manager will support an ASA device. For more in-depth ASA management, you should use ASDM or the Cisco Security Management Suite.