Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone has done this direct upgrade?. Is it better to uninstall LMS 4.0 completely and then install LMS 4.2 or could I do a direct upgrade?. I've heard the db tables etc. have changed a lot and might cause problems for a direct upg...
3560 is running c3560-advipservicesk9-mz.122-40.SE. The SFP (GLC-TX) has been tested in another 3560 and is recognized. Both the gi0/1 and gi 0/2 ports show the type as unknown.Port Name Status Vlan D...
is it possible to upgrade a vss switch - one at a time?i have a lot of servers on my vss switches. if i do the normal upgrade, i have to reboot the vss and loose both my physical switches and all server connectivity is lost. I am wondering if there i...
i have a controller that has mutliple dhcp scopes and should in theory give out close to a thousand plus addresses. But i have seen wireless users not getting addresses once the controller has leased about 490 ip adds. anyone see anything like this ...
Does anyone know what the equivalent oid as chassisid - .1.3.6.1.4.1.9.3.6.3.0, which gets the serial number for most cisco switches/routers is for the ASA 55XX series firewalls.thanks
had PI mess up over 2500 devices on my network, before I realised what was causing this. I have stopped PI and have no intention of using till I know of a perm. fix. working with our cisco acct. mgr to have good response to this - completely unaccept...
Thanks Marvin. I did read your blog on the 4.2.3 upgrade. I do intend to backup my db, export credentials, collectors etc. just in case.A secondary question - do the net config jobs get carried over to the new version or do they all get lost?
LMS 4.0 allowed only ACS (tacacs) authentication - not authorization. You would have to define roles on the LMS server for authorization. With ACS 5 - there really is no support to add in roles (as in ACS 4.0) in the ACS server. I may not be stating...
