EEM, Web Gui -

[djcastaldo]

I saw this techtv broadcast the other day which described a web based user interface. I'm really interested as we are moving more toward a NOC environment and it would be great to have a web interface to the router - however, I am unable to access the links that are provided here...http://blogs.cisco.com/ciscotalk/cin/comments/master_cisco_network_devices(Links from Bruno) and although I did locate the EEM called HTTP Server with CGI support, and unzipped it, loaded it, and followed the instructions.txt - I still have no htpp to the box. I did turn off the standard HTTP (as it says to do that - no ip http server) and I believe I edited the file to point to flash:/HTTP/ rather than disk2: which it says to do - but I got nuthin. No error messages, nothing in debug - nothing. Can someone help me get a customizable web gui going, please? I've been through every link and I'm going in circles....thanks a lot.

[Joe Clarke]

I looked at the show notes in the blog, but I can't find the link you mention.  As for the HTTP server on Cisco Beyond, how exactly have you configured the device?  What are the contents of flash:/HTTP?

[djcastaldo]

Hey, thanks for responding. I'm attaching a file with all the directories and the http config. Needless to say, I've tried this a few times from different directories - to no avail. This is my first time out with the EEM interface, & the MDF(and have no tcl scription experience). The HTTP server does work with the standard ip http server(though I don't get the sdm menu) - Any assist is appreciated. Feel free to talk real slow so I get it . Thanks much.