Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I saw this techtv broadcast the other day which described a web based user interface. I'm really interested as we are moving more toward a NOC environment and it would be great to have a web interface to the router - however, I am unable to access th...
I am installing a 2nd core switch and will be running hsrp between them. Currently one of my routing instances is for an IP VRF - it is calledip vrf myers rd 64576:1For the 2nd switch would I have this as ip vrf myers rd 64576:2 ??Or would it still b...
I have two 3825 routers which seem to run glbp fine, however, I could not communicate to the 3750 switch behind the routers after implementing glbp. HSRP seems to work just fine. Is that what you meant by glbp is not supported on the 3750? If not, do...
I am installing a new site overseas. I have ordered 2 T1/E1 circuits between us, which will terminate on 2 different routers at each end. Per the carrier the circuits will be layer3 MPLS.(Which i just found out a minute ago) but they can be changed t...
I have a 6500 running disk0:s72033-ipservicesk9_wan-mz.122-18.SXE2.bin - when I turn IP accounting on on any vlan or port, I get very little(like 1 packet in a week though they are very active Vlans or ports). Also, I've noticed that there is no mac ...
568750 False Duplicate IP detection on Ethernet modules when used with Cisco switches
Problem
When Rockwell Automation EtherNet/IP modules are connected to a subnet containing Cisco switches with "IP device tracking" (IPDT) enabled, the modules may g...
If the duplicate devices are on an industrial segment, ie, plc's or something like that - AND you have a 3850 installed check your IPDT - see
https://community.cisco.com/t5/switching/cisco-switch-upgrade-leads-to-allen-bradley-plc-duplicate-ip/td-p/...
Hey, thanks for responding. I'm attaching a file with all the directories and the http config. Needless to say, I've tried this a few times from different directories - to no avail. This is my first time out with the EEM interface, & the MDF(and have...
I have two 3825 routers which seemed to run glbp fine, however, I could not communicate to the 3750 switch behind the routers after implementing glbp. HSRP seems to work just fine. Is that what you meant by glbp is not supported on the 3750? If not, ...
I have a question on here as well that has a similar issue. For some reason on these 6500's the mac doesn't seem to be there on ports that are obviously connected, unless traffic is generated from that end host. I am awaiting a response to my query. ...
