01-27-2022 05:53 PM
01-29-2022 01:02 AM
Hello,
as you did notice, you need to follow the standard for cabling. Pins 1 and 2 are always used for transmit, 3 and 6 for receive.
Have a look at the link below:
01-29-2022 03:58 AM
Hi Georg,
Thanks for reply,. Actually I am not getting point that on what basis they(eia/Tia) defined these colours in cable...like white and white green and all colours are there .....
Regards
Ashok
01-30-2022 09:55 AM
Hello,
to be honest, I guess these colors were chosen randomly. According to Wikipedia, "ANSI/TIA-568 was developed through the efforts of more than 60 contributing organizations including manufacturers, end-users, and consultants."
They had to come up with a color scheme. It could have been any color scheme.
01-31-2022 02:06 AM
"whatever we want, then why we don't get that much range which we are getting when we are following standards?"
- because the colours are coded to the twisted pairs in the cable (UTP = Unshielded Twisted Pair cable) and reliable signal transmission requires that the signal is on the correct pairs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide