07-30-2018 12:59 AM
Hello,
Can anyone advice me how to enable SNMP-AUTH-FAIL message on these devices ?
on NX-OS - i did it with simple command - logging level snmpd 6.
But can't get that working with IOS-XE/IOS-XR devices.
07-30-2018 11:17 AM - edited 07-30-2018 11:24 AM
Can you try with this one: snmp-server traps snmp authentication? (XR IOS)
Please do not forget to rate useful post.
Best Regards,
07-30-2018 11:38 PM - edited 07-31-2018 03:53 AM
hello,
I added this: snmp-server traps snmp authentication. No effect.
no i got these commands in IOS XR:
show running-config | include logging snmp-server traps snmp authentication logging history informational
btw on debug snmp config i got:
RP/0/RSP0/CPU0:Jul 31 12:49:56.156 : snmpd[1114]: t1 Batch is not yet supported for: snmp/enable/traps/snmp/authentication
can this mean something ?
also show snmp
shows:
SNMP logging: Disabled
but dont have a clue how to enable it.
07-31-2018 06:50 AM
Please provide your SNMP configuration in the IOS XR device (don't forget to omit sensitive information).
Best Regards,
08-01-2018 12:37 AM
here's my SNMP and logging configuration:
logging trap informational logging history informational logging buffered 307200 logging buffered informational logging x.x.x.x vrf mgmt severity info snmp-server ifindex persist snmp-server vrf mgmt snmp-server user xxx xxx v3 auth md5 encrypted xxxx priv aes 128 encrypted xxx snmp-server view SNMP_VIEW1 1 included snmp-server group xxv3 auth notify SNMP_VIEW1 read SNMP_VIEW1 snmp-server traps snmp authentication
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide