ESM filtering out a message

[pgasparovic]

Hi,

is there a chance to catch a guru here to help me filter out some very annoying messages on IOS XE SDWAN sw, that happen on console while vManage does some activity? Cisco TAC responded that he knows about "no logging console" only...

ESM got on my mind as last possible chance, though an overkill seems so.

So, who could help me to quickly filter out these msgs?

*Jan 6 14:04:37.786: %DMI-5-AUTH_PASSED: R0/0: dmiauthd: User 'vmanage-admin' authenticated successfully from 172.23.9.1:40885 and was authorized for netconf over ssh. External groups:
*Jan 6 14:04:49.494: %DMI-5-AUTH_PASSED: R0/0: dmiauthd: User 'vmanage-admin' authenticated successfully from 172.23.9.1:40921 and was authorized for netconf over ssh. External groups:

Thanks a lot!

Peter

[Georg Pauwen · Accepted solution]

Hello,

not sure if this is supported on your device, but try the logging discriminator below:

logging discriminator DMI severity drops 5 facility drops DMI mnemonics drops AUTH_PASSED

logging buffered discriminator DMI 100000
logging console discriminator DMI
logging monitor discriminator DMI
logging host x.x.x.x discriminator DMI

[pgasparovic]

Maaan, wss just like this but severity param (stupid error).

Now I'm enjoying the (console) silence!!

Thanks, have a great NY2021!

Peter