flash_inic and procesador o espacio suficiente para actualizar

[gtapiau94]

hi. 

i have the switch catalys-3750 and present the mistake in flash_ini , for mistake delet the flash:_init and my switch don´t Processor or Enough Space to Upgrade

switch: flash_ini
Initializing Flash...
...The flash is already initialized.

switch: stack-manager all
Unknown cmd: stack-manager

switch: rmdir flash
Are you sure you want to remove "flash" (y/n)?y
Directory "flash" not removed -- no such device

Unknown cmd:
switch: rmdir flash
Are you sure you want to remove "flash" (y/n)?n
Directory "flash" not removed

switch: delete flash: actualizar.
Are you sure you want to delete "flash:" (y/n)?y
File "flash:" not deleted -- no such file or directory
Are you sure you want to delete "actualizar." (y/n)?y
File "actualizar." not deleted -- no such device

switch: rmdir flash: actualizar
Are you sure you want to remove "flash:" (y/n)?y
Directory "flash:" not removed -- no such file or directory
Are you sure you want to remove "actualizar" (y/n)?y
Directory "actualizar" not removed -- no such device

switch: delete /force /recursive flash: actualizar
Are you sure you want to delete "/force" (y/n)?y
File "/force" not deleted -- no such device
Are you sure you want to delete "/recursive" (y/n)?
File "/recursive" not deleted
Are you sure you want to delete "flash:" (y/n)?y
File "flash:" not deleted -- no such file or directory
Are you sure you want to delete "actualizar" (y/n)?y
File "actualizar" not deleted -- no such device

switch: delete flash:/c2960x-universalk9-mz.150-2a.EX5
Are you sure you want to delete "flash:/c2960x-universalk9-mz.150-2a.EX5" (y/n)?
File "flash:/c2960x-universalk9-mz.150-2a.EX5" not deleted

switch: delete flash:/c2960x-universalk9-mz.150-2a.EX5
Are you sure you want to delete "flash:/c2960x-universalk9-mz.150-2a.EX5" (y/n)?y
File "flash:/c2960x-universalk9-mz.150-2a.EX5" not deleted -- no such file or directory

[marce1000]

      >......The flash is already initialized.
 - El flash ya está inicializado, es normal no encontrar ningún archivo en él, y debe haber suficiente espacio libre.

 M.
   

[amikat]

Hi,

Can you please post the "dir flash:" command output. My guess is that "c2960x-universalk9-mz.150-2a.EX5" is a directory. If so and you wish to delete this one and get extra space please go to that directory ("cd flash:/c2960x-universalk9-mz.150-2a.EX5" command) and delete all the files there and then continue with the "rmdir flash:/c2960x-universalk9-mz.150-2a.EX5" command.

Please note:  If c2960x-universalk9-mz.150-2a.EX5 is your current IOS version you will be unable to boot after deleting.

Best regards,

Antonin