Hello everyone, I've been having troubles with the cpu utilization. There's the output of the command show process cpu | ex 0.00
| CPU utilization for five seconds: 98%/4%; one minute: 72%; five minutes: 68% |
|
|
|
| PID | Runtime(ms) | Invoked | uSecs | 5Sec | 1Min | 5Min | TTY | Process |
| 168 | 1774544891 | 180110692 | 9852 | 44.97% | 47.32% | 47.28% | 0 | Hulc LED Process |
| 349 | 1107 | 214 | 5172 | 16.26% | 1.30% | 0.27% | 1 | Virtual Exec |
| 321 | 5505331 | 312356 | 17625 | 15.94% | 2.95% | 0.63% | 0 | crypto sw pk pro |
| 10 | 18491112 | 120433 | 153539 | 2.87% | 0.36% | 0.25% | 0 | Licensing Auto U |
| 81 | 193759275 | 35146749 | 5512 | 2.39% | 2.87% | 2.89% | 0 | RedEarth Tx Mana |
| 123 | 135537846 | 7245116 | 18707 | 1.91% | 1.82% | 1.78% | 0 | hpm counter proc |
| 80 | 38769721 | 53087242 | 730 | 1.43% | 1.05% | 1.03% | 0 | RedEarth I2C dri |
| 232 | 58704064 | 25590129 | 2294 | 0.95% | 0.80% | 0.79% | 0 | Spanning Tree |
| 173 | 41 | 19 | 2157 | 0.63% | 0.05% | 0.01% | 0 | EEM Callback Thr |
| 157 | 8519050 | 35578202 | 239 | 0.47% | 0.25% | 0.26% | 0 | Hulc Storm Contr |
| 178 | 29785162 | 1442047 | 20654 | 0.47% | 0.38% | 0.38% | 0 | HQM Stack Proces |
| 198 | 2050205 | 1380640 | 1484 | 0.31% | 0.06% | 0.03% | 0 | CDP Protocol |
| 104 | 534072 | 7169187 | 74 | 0.15% | 0.05% | 0.04% | 0 | HLFM aging proce |
| 52 | 19438495 | 7411037 | 2622 | 0.15% | 0.22% | 0.21% | 0 | Per-Second Jobs |
| 120 | 13226395 | 131812705 | 100 | 0.15% | 0.85% | 0.96% | 0 | hpm main process |
| 105 | 2839796 | 180889093 | 15 | 0.15% | 0.18% | 0.16% | 0 | HLFM address ret |
| 323 | 2268453 | 224897579 | 10 | 0.15% | 0.10% | 0.10% | 0 | MMON MENG |
| 212 | 3064108 | 178625218 | 17 | 0.15% | 0.22% | 0.20% | 0 | IP ARP Retry Age |
As you can see, the maximum process is Hulc LED process. The total amount of these is less than 98%. I'd like to know how to see which process is making the high cpu. In addition, I have Energywise configurated on the switches, maybe is because of that.
Thanks a lot for your answers!
