cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2102
Views
0
Helpful
3
Replies
zhenningx
Enthusiast

How to check job failure reasons in Prime Infrastructure

We have PI version 1.3. I applied a CLI template and I saw the job's last run status is Failure in the Jobs Dashboard. But I cannot see any detail information about why it failed. Is there anyway we can see the job failure reasons? Thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Shantha Kumar Selvaraj
Cisco Employee

Hi,

1.One way is to check the logs (Administration-->logging-->download log file).Unzip and look into ifm_config.log

2.Log into diagnostic tool UI and look into logs. https:///webacs/ncsDiag.do

Regards

View solution in original post

Rob Johnson
Cisco Employee

In the jobs dashboard you should see a small circle. If you position your cursor over that small circle more information should be provided giving you hints as to why the job failed.

View solution in original post

3 REPLIES 3
Shantha Kumar Selvaraj
Cisco Employee

Hi,

1.One way is to check the logs (Administration-->logging-->download log file).Unzip and look into ifm_config.log

2.Log into diagnostic tool UI and look into logs. https:///webacs/ncsDiag.do

Regards

View solution in original post

Rob Johnson
Cisco Employee

In the jobs dashboard you should see a small circle. If you position your cursor over that small circle more information should be provided giving you hints as to why the job failed.

View solution in original post

Thanks for the tip. Acutally I cannot see that small circle in jobs dashboard. I finally found out I need to click on the job, then click on History, then the small circle is there under the History.