10-10-2017 03:10 AM - edited 03-01-2019 06:11 PM
Hi all,
I want to know how to configure the switch to server to monitor to snmp trap.
Thanks
10-10-2017 03:30 AM
09-18-2018 07:50 AM
10-24-2018 06:12 PM
You can specify which SNMP traps you want to sent to the server, here is a guide for your reference: https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/13506-snmp-traps.html
Please do not forget to rate useful post.
Best Regards,
10-07-2019 01:47 AM
You can configure SNMPv2c traps quickly with just two commands:
! Enables all traps
snmp-server enable traps
!
!…or select some, for example:
! snmp-server enable traps cpu envmon ospf
!
snmp-server host 10.1.1.10 public
If you need to configure SNMPv3 then follow this guide:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide