How to display broadcast traps by DFM?

[milan.kulik]

Hi,

I've configured

interface FastEthernet0/29

port storm-control broadcast action filter

port storm-control broadcast trap

in my 2900XL config.

So the switch sends a SNMP trap to my Ciscoworks machine when the broadcast threshold is exceeded.

I made some tests which confirmed .1.3.6.1.4.1.9.9.87.2.0.2 SNMP trap was sent to my management servers.

But I don't see anything in my DFM monitoring console.

How can I configure my DFM 1.2 to display these alarms?

(I know there is possible to configure Broadcast threshold (%) for FastEthernet ports via Administration Console, but I've got a feeling it takes data from interface statistics (5 min by default) and not from receiving SNMP trap.)

Thanks,

Milan

[nhabib]

You can't. See the DFM FAQ, click on SNMP Traps:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/dfm/dfm_faq.htm

[milan.kulik]

Thanks for immediate reply.

That's what I was afraid of - CW is not a network monitoring system, it's more an inventory and configuration management system.

Regards,

Milan