cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2072
Views
0
Helpful
1
Replies

How to get/monitor the PTP offset from master on Nexus using SNMP

I'm trying to find an OID that I can use to monitor the ptp clock offset from the master. For clarification: on a switch I execute the command "sh ptp clock" and it gives me the integer value of the "Offset From Master" and so I need an OID that can give me this data to poll for monitoring purposes. Also executing "sh ptp corrections" will give me the offsets for every second. I would like to know of OIDs that exist for this offset from master and for other PTP information. I have nexus switch equipment and using SNMPv3. Please reply if you know of any information or if it even exists. 

Anything helps. Thanks!

1 Reply 1

marce1000
Hall of Fame
Hall of Fame

 

                 - Check this MIB and or any of the mentioned variables can be useful :

                           https://iphostmonitor.com/mib/CISCO-PTP-MIB.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '