how to implement the ethernet port speed limit in cisco N9K-C9372TX-E

[KarthikPalanisamy6017]

Hi Experts,

i have switch with Model number is N9K-C9372TX-E & NXOS: version 7.0(3)I5(2).

May i know the Command to implement the ethernet port speed limit to 25 Mbps on ingress to port or Egress out in the switch?

thanks.

[luis_cordova]

Hola @KarthikPalanisamy6017 ,

Check ir this link can help you:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_7x_chapter_011....

Regards

[KarthikPalanisamy6017]

@luis_cordova yes, i verifed this link but unfortunately this link provides only bandwidth as an informational-only.

basically i would like to apply QoS kind off to limit the bandwidth on the ethernet port. could you help me?

[patoberli]

You don't want QoS, you want Shaping. Not sure if the Nexus can do that, as it's generally a bad idea.

[KarthikPalanisamy6017]

@patoberli oo. Nexus cannot? how do i confirm this?

Yes, basically i would like to limit the bandwidth on this ingress to the port with 25 Mbps.

[patoberli]

Download the manual and search for the word shaping. If you don't find it, it's possible that the Nexus can't do that. Maybe there are also other variants, but I only know of the old version of shaping.