How to run the TCL script/EEM applet on C3750 after bootup into defaults?

[Leo Gal]

Hi gents,

Subject tells it all more less

I have a Cat3750, which, after erase nvram and reload will boot into defaults and

I would like to give him configuration (run the script)

And I was thinking about triggering (how?) the script based on...something after bootup.

Can someone give me a hint please?

Thanks

Leo

[mtimm]

If the system is back at default, it won't have an eem policy registered.  One option might be a feature that has been in IOS for ages that can auto download configurations from the network:

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd2002.html#wp1017913

This would have nothing to do with EEM though.

Mike

[Leo Gal]

Hi Mike

thanks for replying.

But that would need again a configuration command...wouldn't it?

Thanks

Leo

[mtimm]

If you do a write erase and reload without doing a write memory (copy run start) the system will not have a configuration which cause this feature to default to on per:

Defaults
Disabled, except on systems without NVRAM or with invalid or incomplete information in NVRAM. In these cases, autoloading of configuration files from a network server is enabled automatically.

Mike