How to setup ASA 5506 with SSL AnyConnect client for access internal servers and access the internet via remote gateway?

[derekderek]

I just got a new Cisco ASA 5506-X firewall with FirePower licensing. 
We want to set up SSL AnyConnect client for notebook and mobile phones to access internal servers(10.10.30.2/24) and access the internet via the remote gateway. 
I am a newbie to ASA, could I have some examples?  Thanks a lot.
Remote server subnet: 10.10.30.0/24
VPN Pool: 192.168.10.0/24

I tried three examples for the Cisco website, but all of them can only fulfill part of my requirements. 
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/100918-asa-sslvpn-00.html#anc7

[balaji.bandi]

Here is one the Lab guide should able to help you.

[Richard Burts]

@balaji.bandi  has provided a nice example of configuring AnyConnect. The original poster says that he tried 3 examples from Cisco and each was able to achieve only parts of the full requirement. We do not know which examples were used and whether they are similar or different from example from BB. We might be able to give good advice if the original poster would provide details of how AnyConnect was configured and what parts of requirements were not achieved.

HTH

Rick