11-04-2014 07:27 AM
We have two redundant power supplies and one is reporting faulty with the show env power command.
POWER SUPPLY A is DC OK
POWER SUPPLY B is DC FAULTY
The SNMPWALK on the MIB 1.3.6.1.4.1.9.9.13.1.5.1.3 is reporting both as normal.
ciscoEnvMonSupplyStatusTable (1.3.6.1.4.1.9.9.13.1.5) for status
> Status: 1.3.6.1.4.1.9.9.13.1.5.1.3, I see 2 Power Supplies with a
> Status of 1 (Normal):
>
> .1.3.6.1.4.1.9.9.13.1.5.1.2.1005 = STRING: "Switch#1, PowerSupply A"
> .1.3.6.1.4.1.9.9.13.1.5.1.2.1006 = STRING: "Switch#1, PowerSupply B"
> .1.3.6.1.4.1.9.9.13.1.5.1.3.1005 = INTEGER: 1
> .1.3.6.1.4.1.9.9.13.1.5.1.3.1006 = INTEGER: 1
The IOS is ies-lanbasek9-mz.122-58.SE2. Is this a known issue or is there a workaround?
11-04-2014 10:02 AM
It would be good if you can share debug output from device for snmp while polling it to this OID.
Also, please check if your device is configured for "power-supply dual" command to reflect right information?
-Thanks
Vinod
11-05-2014 04:38 AM
11-05-2014 08:18 AM
It appears power cycling the switch corrected the problem. Thanks for you assistance.
11-05-2014 08:22 AM
Thanks for update and this seems to be one of the sure-shot fix for many issues with SNMP mismatch.
I checked a few old issues and they seems to be asking for reboot, but I wanted to check if this is some sort of defect.
Glad to know it has resolved for you.
Cheers..
-Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide