ISP TO ROUTER ISR 4300 TO CISCO CATALYST 3650

[blitzkirze]

Hi,

I having a hardtime configuring my devices to connect through internet, my router reached the isp but switch can't reached. I plugged my pc in switch and no internet access. Here's my configuration.

ISP ADDRESS : 24.50.185.72/29

GATEWAY : 24.50.185.73

ROUTER :

G0/0/0 : 24.50.185.74/29

IP ROUTE TO : 24.50.185.73

G0/0/1 : VLAN 10 10.1.1.1/24

VLAN 20 10.1.2.1/24

VLAN 30 10.1.3.1/24

SWITCH : 

G1/0/24 : SWITCHPORT TRUNK

SWITCHPORT ACCESS VLAN 10

G1/0/1 : SWITCHPORT ACCESS VLAN 20

G1/0/2 : SWITCHPORT ACCESS VLAN 30

Still my segment doesn't reached the other segment and no internet.

Thank you in advance.

[Deepak Kumar]

Hi,

What is the default gateway on PC1? It must be 10.1.2.1

What is the default gateway onPC2? It must be 10.1.3.1

Ping from PC1 to 10.1.2.1

Ping From PC2 to 10.1.3.1

and share the result.

Regards,

Deepak Kumar

[blitzkirze]

Hi,

from PC1 to 10.1.2.1
ping result : Reply from 10.1.2.1: bytes=32 times>1ms ttl:64

ping from PC2 to 10.1.3.1
Reply from 10.1.3.1: bytes=32 time>1ms ttl:64

yes default gateway is as mentioned above. But when I do this.

PC1(10.1.3.33)to PC2 (10.1.2.31)
Ping result is request time out.

but

PC2(10.1.2.31) TO PC1(10.1.3.33)
ping result reply from 10.1.3.33: bytes 32 and so on.

[Deepak Kumar · Accepted solution]

HI,
Check your PC firewall and Antivirus Firewall settings. There is no issue in the network.

Regards,
Deepak Kumar

[blitzkirze]

Thanks for all of your help. Thumbs up and I salute you 👊 Thank you so much 🙏

[Deepak Kumar]

Hi,
I am happy to know that my solution was worked for you. This is not a community, it is a family of Cisco and your welcome in Cisco Family.
Regards,
Deepak Kumar