cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
764
Views
0
Helpful
1
Replies
nawas
Enthusiast

Limit syslog email alerting

I have syslog sev1 and Sev2 email alerts enabled in my Prime LMS4.2.2. Is there a way to limit the alerts so that only one email gets sent for every 100 or 500 duplicate alerts etc.

There are some instances where I received 5000 emails in one night for one of the following error.

Sep 18 09:31:38.742: %ILPOWER-7-DETECT: Interface Gi2/18: Power Device detected: IEEE PD

Sep 18 09:31:50.982: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/18 has a hardware problem. Power is turned off on the port.

Sep 18 09:31:54.494: %ILPOWER-7-DETECT: Interface Gi2/18: Power Device detected: IEEE PD

Sep 18 09:32:06.762: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/18 has a hardware problem. Power is turned off on the port.

Sep 18 09:32:09.790: %ILPOWER-7-DETECT: Interface Gi2/18: Power Device detected: IEEE PD

Sep 18 09:32:22.018: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/18 has a hardware problem. Power is turned off on the port.

Sep 18 09:32:25.502: %ILPOWER-7-DETECT: Interface Gi2/18: Power Device detected: IEEE PD

Sep 18 09:32:37.834: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/18 has a hardware problem. Power is turned off on the port.

Sep 18 09:32:40.902: %ILPOWER-7-DETECT: Interface Gi2/18: Power Device detected: IEEE PD

Sep 18 09:32:53.216: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 2/18 has a hardware problem. Power is turned off on the port.

1 REPLY 1
Vinod Arya
Cisco Employee

Currently the Automated Action is a straight forward action in terms of sending email notification. It acts somehow dumb, so as what you configure, it will act as per it. No further properties can be modifed to set the email rate or set LMS to send one consolidated email.

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Content for Community-Ad