cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1275
Views
0
Helpful
3
Replies

Link down alerts on our group

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

You can set up an SNMP Trap to get alert your group,.

 

or you can use the EEM script on the device to send an email, Let us know which method you like to use, so we can suggest some information.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi 

My query is as follows 

1. We have multiple ISP Links on the Router on multiple Ethernet interfaces. 

2. If there is a Service provider cloud issue, Fiber cut etc , then the Link is down 

3. The ethernet port however remains up , since it is connected to the MUX 

 

Would like to have a solution -

1.To understand what trap would provide the Link down , along with IP Addresss and Port description 

2. How to configure this trap in NMS, with respect to OID and MIBS and what exact description to catch and generate a Trap to Ticket 

 

regards

Dharmesh

Would like to have a solution -

1.To understand what trap would provide the Link down , along with IP Addresss and Port description 

2. How to configure this trap in NMS, with respect to OID and MIBS and what exact description to catch and generate a Trap to Ticket 

This can only Possible by checking the next hop address using source IP on the ISP  Links

NMS Most case only give you information related to Physical port up and down.

 

As i have suggested, you can run EEM Script to send email what ISP Link not rechable ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help