cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
974
Views
0
Helpful
4
Replies

LMS 2.5 - User Tracking problem

adapozzo79
Beginner
Beginner

Hi all,

I have some switches:

- Model: WS-C3750X-48P-L

- IOS Version 12.2 (55) SE3

there is a problem with User Tracking feature on the CiscoWorks (LMS 2.5)

Specifically while doing a search of all hosts that are attached on these switches, I don't receive any results.  I noted that removing and re-inserting the switches solves the problem however, randomically after sometime it occurs again.

Could you let me know how we can permanently solve this issue?

Thanks

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

I don't believe the 3750X is supported by LMS 2.5. That switch was introduced long after LMS 2.5 was no longer sold (2007, development/updates ended in 2008 per the EoS/EoL notice)

I can't find the document for LMS 2.5 support details at the moment but even the LMS 3.0 Supported Devices Table doesn't list the 3750X.

View solution in original post

4 Replies 4

Marvin Rhoads
Hall of Fame
Hall of Fame

I don't believe the 3750X is supported by LMS 2.5. That switch was introduced long after LMS 2.5 was no longer sold (2007, development/updates ended in 2008 per the EoS/EoL notice)

I can't find the document for LMS 2.5 support details at the moment but even the LMS 3.0 Supported Devices Table doesn't list the 3750X.

Vinod Arya
Cisco Employee
Cisco Employee

Anyone who Heards LMS 2.5 would react on suggesting upgrading it, as it is unsupported since long back.

Even if you dont have a feasibility to move to 3.x or 4.x series, you should upgrade to LMS 2.6 which is the most stable release in 2.x.

In old LMS 2.x days all the modules were with separate teams hence the supported devices were also module wise, like RME, CM, DFM etc.

RME 4.0.5 is with LMS 2.6 which even does not support 3750X. Check the document here and try seaching using sysObjectID.

-Thanks

-Thanks Vinod **Rating Encourages contributors, and its really free. **

I have various 3750 switches but only have this problem on a couple of them. I found this documentation at the following link which mentions the devices supported by LMS 2.5.1 having RME 4.0.3.

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.0.3/device_support/table/RME403.html#wp229542

http://www.cisco.com/E-Learning/public/shared/pdf/RME4_0_Tutorial_Final.pdf

Any ideas?

As has been eluded to previously, your best bet is to upgrade to LMS 2.6.x and latest version of Campus Manager 4.0.x. Not sure why you are mentioning RME when User Tracking is a campus manager function. There have been numerous of reasons why user tracking would stop looking up previously known hosts.

Firewall, DB corruption, user tracking stuck in a running state, data collection not ran for a while (Major and Minor), bug in UT or campus manager.  If you really dont want to upgrade, you need to look at the UT.log under CSCOpx/log directory for any errors.

Ideally the best solution like Vinod stated, upgrade to the latest of LMS 2.6.x.x and patch up all the modules to current version.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: