05-07-2010 08:16 AM
Hello,
Dears all,
I have experienced a default in LMS 2.6 /RMe 4.0.6
When we want to distribute image by Software distribution, the upgrade is aborted saying that the job is failed.
When it's done by a netconfig job it's running ok , with a success job.
It's arrived at severals devices.I have attached an example for a device that's is working with networking but not with distribution .
Richard
05-07-2010 08:19 AM
I would like to say....Netconfig instead of networking.........
05-07-2010 09:09 PM
Judging by the fact that the Netconfig copy is from a different server than the SWIM copy, I can only assume that there is a network problem when SWIM copies the image from (what I assume is) the RME server. Try running the Netconfig job, and copy the file from 10.104.140.209. See if it succeeds. My guess is it will not.
05-17-2010 02:05 AM
It's ok , the job is failed:
I have joined the result from the job launched. The end user has remarked other thing.
The LMS has been set up in Master /Slave config. So , in the Master , the software distribution works well
and it's in the slave that's it failed.
Richard
05-17-2010 02:49 PM
I don't understand. Are you saying the issue has been identified, and is no longer a problem?
05-18-2010 01:21 AM
What i would like to do is first , answer to your last proposition of test:
" Try running the Netconfig job , and copy the file from 10.104.140.209. See if it succeeds".
§ ......So, the answer is that it' s not working ......../.§
The second thing , is that we have remarked that from the Master is working and not from the slave.
Shoud we consider that the image distribution is not working well ?
Richard.
05-18-2010 09:52 AM
What is different, network-wise, between the master and slave servers? That is, are they on different subnets? The problem i
s most likely still network-related as Netconfig isn't doing anything that a manual copy would not do at the point the timeout occurs.
05-25-2010 02:35 AM
Yes it's ok..
I have asked to take some IP trace on the Master and the Slave.
At first, it seems that that is not coming from network as tehboth station are on the subnet.
I have a look when i will received some infos , and i will post them.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide