LMS 3.2 not recognizing C3560CG

[pawelkostera]

Hi,

We have recently bough a couple of the new C3560CG-8PC-S switches, but they are not being recognized by the LMS 3.2;

Is there any patch or device firmware I can update on the LMS to have support of that switch on the LMS 3.2 ?

Regards

Pawel Kostera

[Thomas Masters · Accepted solution]

To determine device support in LMS 3.2:

Use device center and snmpwalk the device using OID .1.3.6.1.2.1.1.2

Then see if it is in the supported device table:

http://www.cisco.com/en/US/partner/products/sw/cscowork/ps2425/products_device_support_tables_list.html

If there is a patch you will find it on the download page

http://www.cisco.com/cisco/software/type.html?mdfid=282635181&flowid=16561

Answer:

Scope : LMS 3.2.1/Windows

Symptoms : Want to know the support for WS-C3560CG-8PC-S with LMS 3.2.1

Resolution : It is not supported with LMS 3.2.1 and would be supported
begins in LMS 4.1.