01-17-2012 01:12 AM
Dears,
I have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).
After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.
Any idea what might be the root cause and resolution for this?
Regards,
01-19-2012 01:39 AM
We have the same problem, any ideas?
The problem results after the windows team patched our server..
But they have no idea was the problem could be.
regards
01-26-2012 04:44 AM
Download from Cisco the lms4.0.1-win-consolidated-cs-sept2011.zip patch, extract it to a folder in C:\ (Not in the Ciscoworks root directory).
From the command line CMD, go to the bin directory in Ciscoworks CSCOpx\bin and run the command:
perl C:\folder-extracted\CSCtr64005-0.pl
Once completed, restart the server and test.
Let me know about the outcome.
Regards,
01-27-2012 02:09 AM
Thanks for your infos, but the patch dont help.
the problem is still the same.
regards
02-01-2012 04:55 AM
Dear Marco,
Try the below 5 steps procedure, and let me know the end result.
STEP 1:
Check that the services are all running as expected. The services should have this status in a normal condition:
Start -> Control Panel -> Administrative Tools -> Services
CiscoWorks ANI database engine - Manual (if Campus Manager installed)
CiscoWorks Daemon Manager - Automatic
CiscoWorks RME NG database engine - Manual (if RME installed)
CiscoWorks Tomcat Servlet Engine - Manual
CiscoWorks VisiBroker Smart Agent - Manual
CiscoWorks Web Server - Manual
CWCS Cmf database engine - Manual
CWCS rsh/rcp service - Automatic
CWCS syslog service - Automatic
CWCS tftp server – Automatic
DFM dfmEpm database engine - Manual
DFM dfmFh database engine - Manual
DFM dfmInv database engine – Manual
STEP 2:
Change the CASUSER permissions in Windows and add it to the administrators group (In case it was not added).
STEP 3:
Force a checkpoint for RME and CMF databases (This returns the database pointer to good configuration point, without deleting any data), using the below procedure:
0) net stop crmdmgtd
1) In the command line go to NMSROOT\CSCOpx\databases\rmeng
2) From the command line, please run the command “dbsrv10 -f rmeng.db” for three consecutive times
3) In the command line go to NMSROOT\CSCOpx\databases\cmf
4) Please run the command “dbsrv10 -f cmf.db” for three consecutive times
5) net start crmdmgtd
STEP 4:
Do a reset for the CASUSER in the LMS application, using the below procedure:
Go to the location NMSROOT\CSCOpx\setup\support\ then double click on resetCasuser.exe (choose option number 1)
STEP 5:
Restart the server and check if the devices are appearing now.
Regards,
02-09-2012 10:16 PM
Hi
we have upgraded on LMS 4.1, now it works.
regards
Marco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide