LMS 4.0 User Defined Group

[dominoforever]

Hi,

I'am a novice with LMS 4.0.

I create 4 device group in Group Management, I restarted my server and since this reboot, I haven't any device in my groups.

I would like to use the archive synchronization but I can't see my device in my groups.

Could you please help me?

Kind regards,

Sébastien

[Michel Hegeraat]

Quite a few times after a reboot it appears as if there are no devices in the DCR.

You can see this for example in device management where the various device groups are present but all appear to be empty. If the devices were not there the device groups would not exist either.

I have yet to get any serious feedback form cisco regarding this is issue.

usually a:

net stop crmdmgtd

net start crmdmgtd

fixes the issue.

Cheers,

Michel

[dominoforever]

Thank you Michel for your reply.

I stopped and restarted the service but it doesn't work yet. I had to stop and start the PMCOGSServer in the Cisco Process Server too.

I went to the Device Group Administration, I edited my Group but in the Membership Edit I have nothing, is that correct?

Kind regards,

Sébastien

[Michel Hegeraat]

So do you see devices in the DCR now?

But not in the groups you defined?

Goto: Admin -> System -> Group Management -> Device

Select the group and click Details. Post the results

Should look like this

If you don't have any devices check if there are devices in the parent group. If not then it is logical.

Normaly the parent is  LMS@servername/User Defined Groups

Properties: Details
Group Name:	Site_12
Parent Group:	/LMS@didata/User Defined Groups
Type:	Device
Description:
Membership Update:	Automatic
Created By:	admin                   :                      Thu 05-May-2011 09:47:46 CEST
Last Modified By:	System                   :                      Thu 05-May-2011 09:49:42 CEST
Rules:	Device.ManagementIpAddress startswith "10.170."
Visibility Scope:	Public

Cheers,

Michel

[dominoforever]

Where can I found DCR?

If I go in Inventory > Tools > Cisco View - I cannot se my devices.

See the properties of my user defined groups.

I have no device in my groups! Why?

[dominoforever]

I went to My Menu > Configuration

I have these messages :

What can I do to resolve this?

[dominoforever]

Hi,

This morning I tested to modify one of my defined user groups and my devices were displayed!

Thank you for your help.