01-16-2013 11:58 AM
Hi,
we are using the prime 4.2. want to know the capabilty of the HUM poller. How many interfaces can be added in a single hum poller ???
And total interfaces can be managed by the HUM as recommended by the cisco ??
Any help would be appreciated...
Regds,
Channa
Solved! Go to Solution.
01-17-2013 03:40 AM
HI Channa,
LMS supports polling MIB object variables based on hardware configuration.
kinldy check the below link:
I hope this will help
Thanks
Afroz
01-17-2013 03:40 AM
HI Channa,
LMS supports polling MIB object variables based on hardware configuration.
kinldy check the below link:
I hope this will help
Thanks
Afroz
01-17-2013 12:33 PM
Hi Afroj,
Thanks for your reply.
Is there any way to check how many MIB's are currently polled in the lms ???
And how many MIBs(instances) would one single interface poll ???
Thanks,
Channa
04-10-2013 06:35 AM
Hi Afroj,
sorry for bothering you..
Want to know is there any way to check the number of instances currently used ??
Regds,
Channa
04-10-2013 06:42 AM
Hi Channa,
go to Monitor > Dashboards > Monitoring and look under
Performance Threshold Information
Thanks
Afroz
04-10-2013 06:52 AM
Thank you for your reply Afroj..
Is the numbers of instances are similar to numbers of mibs polled ??
Regds,
Channa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide