cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
794
Views
0
Helpful
1
Replies

LoadBlancer not working fine

     Hi All,

i  have ACE module in 6.000 series of switches and i configured one  context C1 and i have many serverfarm on of them include 4 probe wit  different ports three of them working fine and forward requests to the  servers proberly, but there is probe of them have a problem as the  requests going to on of the servers only and also it be too delayed.

kindly i need help of you as it is more urgent for me,

as the below is my configuration :

## sh probe TCP2310

probe       : TCP2310

type        : TCP

state       : ACTIVE

----------------------------------------------

   port      : 2310    address     : 0.0.0.0         addr type  : -          

   interval  : 5       pass intvl  : 10              pass count : 2   

   fail count: 3       recv timeout: 10  

                       --------------------- probe results --------------------

   probe association   probed-address  probes     failed     passed     health

   ------------------- ---------------+----------+----------+----------+-------

   serverfarm  : tabsintlh

     real      : tabsas01[0]

                       10.160.162.24   13170      454        12716      SUCCESS

     real      : tabsas02[0]

                       10.160.162.25   13281      386        12895      SUCCESS

## sh probe detail

probe       : TCP2310

type        : TCP

state       : ACTIVE

description :

----------------------------------------------

   port      : 2310    address     : 0.0.0.0         addr type  : -          

   interval  : 5       pass intvl  : 10              pass count : 2   

   fail count: 3       recv timeout: 10  

   conn termination : FORCED   

   expect offset    : 0         , open timeout     : 10       

   expect regex     : -

   send data        : -

                       --------------------- probe results --------------------

   probe association   probed-address  probes     failed     passed     health

   ------------------- ---------------+----------+----------+----------+-------

     real      : tabsas01[0]

                       10.160.162.24   13177      454        12723      SUCCESS

   Socket state        : CLOSED

   No. Passed states   : 37         No. Failed states : 37

   No. Probes skipped  : 72         Last status code  : 0

   No. Out of Sockets  : 0         No. Internal error: 0

   Last disconnect err :  -

   Last probe time     : Fri Dec 23 10:50:16 2011

   Last fail time      : Fri Dec 23 09:03:30 2011

   Last active time    : Fri Dec 23 09:04:45 2011

     real      : tabsas02[0]

                       10.160.162.25   13288      386        12902      SUCCESS

   Socket state        : CLOSED

   No. Passed states   : 32         No. Failed states : 32

   No. Probes skipped  : 0         Last status code  : 0

   No. Out of Sockets  : 0         No. Internal error: 0

   Last disconnect err :  -

   Last probe time     : Fri Dec 23 10:50:16 2011

   Last fail time      : Fri Dec 23 08:36:25 2011

   Last active time    : Fri Dec 23 08:37:40 2011

## sh run | b serverfarm host tabsintlh

serverfarm host tabsintlh

  failaction purge

  probe TCP2100  >>>>>is working fine

  probe TCP2310  >>>>>is not working and we are using to by path the loadbalancer in that port

  probe TCP3210 >>>>>is working fine

  probe TCP7779 >>>>>is working fine

  fail-on-all

  rserver tabsas01

    inservice

  rserver tabsas02

    inservice

sticky http-cookie 10.10.96.110 GROUP1

  cookie insert browser-expire

  timeout 720

  timeout activeconns

  replicate sticky

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Please re-post in the Data Center Application Networking forum. Most of the ACE expertise watches that forum.

View solution in original post

1 Reply 1

Marvin Rhoads
Hall of Fame
Hall of Fame

Please re-post in the Data Center Application Networking forum. Most of the ACE expertise watches that forum.