07-20-2007 12:59 AM
To start with single router was configured to log the enteries to cisco works 2000.Router was unable to make an entry in syslog.log of cisco works2000 on windows 2000 server but the router was able to log message on kiwi syslog daemon as well as on the router console.Please tell us, What should be done to make the router log messages to
syslog.log file of cisco works 2000 ?
07-20-2007 06:19 AM
Just make sure that the syslog service is started on the server and enable logging to the IP address of the server on the device.
logging
This should be all that is needed to make it to the server log file.
Try generating a message with packet capture enabled on the server to see if the message is making it to the server.
07-20-2007 10:03 PM
logging was enabled to the IP address of the server on the router. On another windows 98 machine kiwi syslog daemon was installed and
logging was enabled to the IP address of the
machine having kiwi installed.Now router was
supposed to log on both the machines (i.e. on
windows 98 machine having kiwi as well as on
the server having cisco works 2000).reload command was fired from the router the message
appeared on kiwi but there was not entry in
syslog.log file.
As per your suggetion packet capture software
is being down loaded and it will be viewed if message is making it to the server.
07-30-2007 02:53 AM
There is fire wall on our network.On an average four messages are being logged on to syslog server.Ciscoworks 2000 logs one message within two to four seconds where as kiwi(free syslog server) logs around all the messages generated by the fire wall.Most of the Messages from other devices are not logged on to syslog.log file by the ciscoworks 2000 .Are there any set up set changes / configuration changes required so that Cisco works 2000 logs all the messages in syslog.log file?
07-30-2007 03:07 AM
There is fire wall on our network.On an average four messages are being logged on to syslog server by the fire wall.Ciscoworks 2000 logs one message within two to four seconds where as kiwi(free syslog server) logs around all the messages generated by the fire wall.Most of the Messages from other devices are not logged on to syslog.log file by the ciscoworks 2000 .Are there any set up set changes / configuration changes required so that Cisco works 2000 logs all the messages in syslog.log file?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide