03-15-2010 03:16 AM
I run reports for inventory which run on SNMP however I am not getting modules information. We got information the Mib that application picks from devices does not contains the Mib which contains the information for modules. Which MIB on the Cisco tree pertains to module information? The affected devices and software are as follows.
cisco WS-C4507R System image file is "bootflash:cat4000-i9k91s-mz.122-25.EWA5.bin"
cisco Cat6k-MSFC2 (R7000) System image file is "bootflash:c6msfc2-psv-mz.121-13.E11.bin"
Model: WS-C6509 System Boot Image File is 'bootflash:cat6000-sup2k8.7-6-5.bin'
cisco WS-C4507R-E Software (cat4500-ENTSERVICESK9-M),Version 12.2(44)SG,
cisco WS-C4510R System image file is "bootflash:cat4000-i9k91s-mz.122-25.EWA5.bin"
Thanks
Mayamba
03-15-2010 05:59 AM
as jclarke mentioned in this thread, chassis and line-card information comes from ENTITY-MIB or CISCO-STACK-MIB
ENTITY-MIB:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-ENTITY-ASSET-MIB
CISCO-STACK-MIB:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-STACK-MIB
Also see this thread about inventory collection:
03-18-2010 04:30 AM
Hi,
Thanks very much, this solved the problem.
Mayamba
Mayamba Mwanza
Level 2 Technical Support Engineer
Dimension Data Europe
Tel: +44 12 5277 9150
Fax: +44 12 5277 9010
mayamba.mwanza@eu.didata.com
Dimension Data House, 2 Waterfront Business Park, Fleet Road, Fleet, Hampshire, GU51 3QT, United Kingdom
For further information about Dimension Data, please go to http://www.dimensiondata.com/
P Before printing this email please think about the environment
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide