Showing results for 
Search instead for 
Did you mean: 

MIBs for Cisco 10000-PRE4

Hi sir,

I'm trying to locate the SNMP MIBs for Cisco 10000-PRE4 with IOS 12.2(33)SB5 and UPTO 8K SUBSCRIBERS W/3DES feature set.

It's not available. Only the MIBs for 10000-PRE3 with same IOS version & feature set is available.

Can I use the 10000-PRE3 MIBs to manage the 10000-PRE4? Are they the same?

Please advise.

Thank you.


Lim TS

Hall of Fame Cisco Employee

Please post the show ver from this router.


Hi Joe,

Here you go...

Cisco IOS Software, 10000 Software (C10K4-K91P11-M), Version 12.2(33)SB5, RELEASE SOFTWARE (fc1)

Technical Support:

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Sat 04-Apr-09 11:03 by prod_rel_team

ROM: System Bootstrap, Version 12.2(20071113:194412) [shalpin-rom-1_2 101], DEVELOPMENT SOFTWARE

C10K-PRE4 uptime is 4 days, 3 hours, 32 minutes

Uptime for this control processor is 4 days, 3 hours, 32 minutes

System returned to ROM by power-on

System image file is "bootflash:/c10k4-k91p11-mz.122-33.SB5.bin"

Last reload type: Normal Reload

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

Cisco C10008 (PRE4-RP) processor (revision V02 ) with 2588671K/163839K bytes of memory.

Processor board ID NWG130204TA

SB-1 CPU at 800Mhz, Implementation 0x410, Rev 5.0, 512KB L2 Cache

Backplane version 1.0, 8 slot

Last reset from power-on

PXF processor tmc0 is running.

PXF processor tmc1 is running.

PXF processor tmc2 is running.

PXF processor tmc3 is running.

1 FastEthernet interface

5 Gigabit Ethernet interfaces

7039K bytes of non-volatile configuration memory.

126000K bytes of ATA compact flash in bootflash (Sector size 512 bytes).

1000944K bytes of ATA compact flash in disk0 (Sector size 512 bytes).

Standby is up

Standby has 2752512K bytes of memory

Configuration register is 0x2102

Thank you.


Lim TS

Hall of Fame Cisco Employee

I just added support for this platform to the MIBs In Images tool. Send email to with a subject of "help" to see how to use the tool.

Content for Community-Ad