Model Number OID not specific

[rmase19]

Hello. Can I change the OID aka sysObjectID on a specific device or is it only changed or updated when the IOS is updated. For example 3750 and 3850 Catalyst Switches are showing in monitoring software(Netmri, Solarwinds, etc) as "catalyst37xxStack" or "catalyst38xxStack" instead of the actual model name for example, WS-C3750V-24PS-S, which does have a specific OID. As shown below.

catalyst37xxStack -SysObjectID value: 1.3.6.1.4.1.9.1.516 

WS-C3750V2-24PS-S - SysObjectID value:1.3.6.1.4.1.9.1.1023

I do understand that the sysObjectID is stored in the MIB. Is there a way  to see the SysOjectID value from the CLI?

Thanks!

[Mark Elsen]

- Try show snmp mib

M.

[rmase19]

Thanks M. I've tried that and unfortunately it does not show the SysObjectID.