06-11-2012 10:23 AM
Hi,
I have a new 4506-E, power on the 1st time, got the message:
!!![ BIST FAILED - TEST ABORTED ]!!!
Power-on-self-test for Module 1: WS-X45-SUP6L-E
Test Status: (. = Pass, F = Fail, U = Untested)
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Looopback ...
Test Results: Fail
Traffic: L2 Loopback ...
Test Results: Fail
Switching Subsystem Memory ...
Packet Memory Test Results: Fail
Module 1 Failed
Rommon reg: 0x00000380
Please. advice. Thanks
PS. Already re-seated the module: same problem
06-11-2012 03:00 PM
Please contact Cisco TAC. There is nothing you can do.
06-18-2012 12:55 PM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide