cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1179
Views
0
Helpful
5
Replies

Need to create threshold setting only for trunks in lms 4.2.2 ?

Pandian G K
Level 1
Level 1

Hi,

I need to create threshold for only to the trunk ports can any one help me  in this ???

---

pandian

2 Accepted Solutions

Accepted Solutions

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Pandian,

Check the attached screen shot ,

I hope this will help

Thanks

Afroz

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

Hello Pandian G K,

in the following menu you can set the E-Mail Notification.

I hope this helps.

Event Sets

Admin-->Network-->Notification and Action Settings--> Event Set

Fault Notification Group

Admin-->Network-->Notification and Action Settings--> Fault Notification Group

Fault - Email notification

Admin-->Network-->Notificationand Action Settings-->Fault - Email notification

Kind regards

Mats

View solution in original post

5 Replies 5

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi Pandian,

Check the attached screen shot ,

I hope this will help

Thanks

Afroz

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

Hi Afroj Ahmad,duong.nguyen7,

Thanks for your info. i wll check and revert back to you .

Duong Nguyen
Level 1
Level 1

Afroj nailed it.  The default settings should already been applied to the DFM.  I rarely get alerts/faults that hit the default value.  Though sometimes for testing purpose I decrease the utilization to 15-20% to help track and troubleshoot.

Pandian G K
Level 1
Level 1

Hi Afroj Ahmad,duong.nguyen7,

   I have one more doubt how to enable email notification if interface utilization  exceeds above the threshhold limit what ever i have set for those trunk ports .

thanks,

pandian

  

Hello Pandian G K,

in the following menu you can set the E-Mail Notification.

I hope this helps.

Event Sets

Admin-->Network-->Notification and Action Settings--> Event Set

Fault Notification Group

Admin-->Network-->Notification and Action Settings--> Fault Notification Group

Fault - Email notification

Admin-->Network-->Notificationand Action Settings-->Fault - Email notification

Kind regards

Mats

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: