09-21-2011 04:16 AM
Hi,
i have an issue for collect data on adapter 1, that don´t collect data but see that adapter 2 if collect data on module 4.
monitor session 1 source vlan 102 rx
monitor session 1 destination analysis-module 4 data-port 1
monitor session 2 source vlan 106 rx
monitor session 2 destination analysis-module 4 data-port 2
I reconfigured newly monitor and continues with that issue. Always ok by data-port 2.
- show version Cisco 6513
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH7, RELEASE SOFTWARE (fc3)
. show version NAM
NAM application image version: 3.5(1b)
- sh module
Ports Card Type Model
----- -------------------------------------- ------------------
8 Network Analysis Module WS-SVC-NAM-2
Hw Fw Sw Status
------ ------------ ------------ -------
2.0 7.2(1) 3.5(1b) Ok
Any idea or cuestion?
09-26-2011 03:01 AM
Hi,
any ideas?
I see Nam Traffic Analyzer
that CPU is 100%
System Uptime: | 448 days, 15 hours, 1 minutes | ||
CPU Utilization: | 100.0% | ||
Memory Utilization: | 32% |
with show-tech:
top - 14:12:43 up 444 days, 15:49, 5 users, load average: 0.01, 0.03, 0.00
Tasks: 65 total, 1 running, 63 sleeping, 0 stopped, 1 zombie
Cpu(s): 14.5% us, 0.5% sy, 0.0% ni, 84.9% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 969300k total, 918312k used, 50988k free, 79700k buffers
Swap: 0k total, 0k used, 0k free, 519652k cached
09-29-2011 04:42 AM
Hi,
I see web GUI that is active 2 monitor session with Destination Module 4.
Active SPAN Sessions |
![]() |
|
But don´t see data about DATA PORT 1, but if see data about DATA PORT 2
Data Source: |
![]() | |||||
Most Active Applications (bytes/sec)
| Most Active Hosts (output bytes/sec)Total hosts 90 (Network)
| ||||
Protocol Suites
| Server Response Times (msec)
| ||||
![]() |
Any ideas?
01-27-2013 12:39 PM
Its really strange i didn't find any help on NAM Solutions? here
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide