Re: New-LH-SFP Error logs

rebu.idicheria · ‎10-08-2019

Dear Team,

We have received genuine Cisco SFP and below are list of serial numbers:

50 Qty of GLC-LH-SMD

FNS19240UEM			FNS19240UDQ
FNS19240U99			FNS19240UD9
FNS19240UFV			FNS19240UDD
FNS19240UG0			FNS19240U8S
FNS19240UE7			FNS19240UD5
FNS19240UE0			FNS19240UA2
FNS19240UE1			FNS19240UAG
FNS19240UEB			FNS19240UFN
FNS19240UE4			FNS19240UEU
FNS19240UFR			FNS19240UEZ
FNS19240UF8			FNS19240UBF
FNS19240UDR			FNS19240UEQ
FNS19240UCN			FNS19240U8B
FNS19240U8J			FNS19240U87
FNS19240UE9			FNS19240UAD
FNS19240UDV			FNS19240U8V
FNS19240UCS			FNS19240UF5
FNS19240U90			FNS19240UCK
FNS19240UAX			FNS19240UCU
FNS19240UDT			FNS19240UD0
FNS19240U9E			FNS19240UDH
FNS19240UFG			FNS19240U9Z
FNS19240UAT			FNS19240U9S
FNS19240UBK
FNS19240UCB
FNS19240UAM
FNS19240UBL

While getting them in Plugged in to our cisco equipments. We are receiving below errors:

on Switch

00:40:04: %PHY-4-CHECK_SUM_FAILED: SFP EEPROM data check sum failed for SFP interface Gi0/23

on Router with XE IOS

*Oct 8 10:08:10.888: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:08:10.888: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:08:10.888: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:08:12.271: %TRANSCEIVER-3-INIT_FAILURE: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:09:11.894: %TRANSCEIVER-6-REMOVED: R0/0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:09:11.894: %TRANSCEIVER-6-REMOVED: F0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:09:11.894: %TRANSCEIVER-6-REMOVED: SIP0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:10:04.905: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:10:04.905: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:10:04.905: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:10:07.749: %TRANSCEIVER-3-NOT_SUPPORTED: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:10:08.818: %TRANSCEIVER-3-NOT_SUPPORTED: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:11:31.855: %TRANSCEIVER-6-REMOVED: R0/0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:11:31.855: %TRANSCEIVER-6-REMOVED: SIP0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:11:31.855: %TRANSCEIVER-6-REMOVED: F0: iomd: Transceiver module removed from Gigabitethernet0/0/0

*Oct 8 10:11:36.837: %TRANSCEIVER-6-INSERTED: R0/0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:11:36.837: %TRANSCEIVER-6-INSERTED: F0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:11:36.837: %TRANSCEIVER-6-INSERTED: SIP0: iomd: transceiver module inserted in Gigabitethernet0/0/0

*Oct 8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: R0/0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: SIP0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

*Oct 8 10:11:38.151: %TRANSCEIVER-3-INIT_FAILURE: F0: iomd: Detected for transceiver module in Gigabitethernet0/0/0, module disabled

Please let us know what is the fault. Is it with the SFPs or do we need to enable any feature on our equipment?

Waiting for your reply ASAP.

Thank you and Best regard

Rebu Cherian Idicheria

Leo Laohoo · ‎10-08-2019

What firmware are the router and switch running on?

rebu.idicheria · ‎10-08-2019

ASR 1002

#sh version | include .bin

System image file is "bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin"

ISR 4221/K9

site-A#sh version | include .bin

System image file is "bootflash:isr4200-universalk9_ias.16.12.01a.SPA.bin"

Leo Laohoo · ‎10-09-2019

Upgrade the IOS of the ASR first. 3.6.0 is not really a "stable" version.

rebu.idicheria · ‎10-09-2019

Ok, I understand we need to change the IOS for the ASR 1002, but what about the ISR 4221, it is the latest version.

also the switch version as below:

Switch

sh version | include .bin

System image file is "flash:/c2960-lanbasek9-mz.122-25.SEE2.bin"

Leo Laohoo · ‎10-09-2019

I'm not concerned about the 4221.
2960 IOS is old and unreliable. Upgrade to something more recent, like the latest 15.0(2)SE train.