NEXUS 5000: read CPU Load with SNMP

[ylvie3434]

Hallo,

tried to read the NEXUS 5000 cpu load:

cseSysCPUUtilization 1.3.6.1.4.1.9.9.305.1.1.1

but there is a  timeout:

Timeout: No Response from 10.100.224.16

Other MIB values readout, like the system value, is ok.

We use snmpv3.

Thanks

ylvie

[AFROJ AHMAD]

Hi Ylvie,

There are a few sources for CPU utilisation values from SNMP, the classic
ones from CISCO-PROCESS-MIB:

 cpmCPUTotal5secRev     1.3.6.1.4.1.9.9.109.1.1.1.1.6
 cpmCPUTotal1minRev     1.3.6.1.4.1.9.9.109.1.1.1.1.7
 cpmCPUTotal5minRev      1.3.6.1.4.1.9.9.109.1.1.1.1.8

And a new source in CISCO-SYSTEM-EXT-MIB, cseSysCPUUtilization
(1.3.6.1.4.1.9.9.305.1.1.1). Unlike the averaged values from CISCO-PROCESS-MIB,
cseSysCPUUtilization returns an un-smoothed value and typically shows more erratic
results.so  I would recommended the objects from CISCO-PROCESS-MIB 
ie. cpmCPUTotal5secRev instead.

Thanks
Afroj 

[ylvie3434]

thank you Afroj, it works

[AFROJ AHMAD]

Hi Ylvie,

Thanks for the update.

If this post answers your question, please click the "Correct Answer" button"

Thanks

Afroj

[ylvie3434]

can't find the "Correct Answer" button...sorry