ā02-23-2016 03:46 PM
Hi,
I am trying to troubleshoot this issue where users have been complaining about being able to connect to the network but not being able to access the internet i.e. the webpage doesn't open. However, the other SSID's configured on the same router seem to be working fine.
I tried pinging various public IP's from this interface but it was a no go. The same command on different sub interface on the same router seem to be working just fine.
Made sure, there is no NAT issue neither there is any firewall issues. I have tried all sorts of troubleshooting methods but havent had any luck.
Can anyone tell me how can I troubleshoot this?
Sincerely,
Shubham
ā02-23-2016 06:18 PM
Can you post the related configs?
ā02-24-2016 10:24 AM
*CONFIG REMOVED*
ā02-24-2016 10:24 AM
Is the client getting a DHCP address on this network?
Does the firewall have a return route for the 10.226.104.0/24 network, and rules to NAT this traffic?
ā02-24-2016 03:29 PM
There is no NATing taking place as the show ip nat translations does not yield any results. All the configs in the Palo Alto FW look normal.
ā03-14-2016 04:40 PM
Can you mirror the port from Palo Alto FW and check what packets are arriving and what FW is returning back. Try both Egress and Ingress ports to give clear picture.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide